Anschütz air rifle model 9015 ONE Basic BENCHREST
Anschütz air rifle model 9015 ONE Basic BENCHREST
The new ANSCHÜTZ 9015 ONE BASIC BENCHREST is a target air rifle based on our successful 9015 ONE BENCHREST PRO model. The outstanding precision and various adjustment possibilities of the fore-end combined with the unrivaled target two-stage trigger 5065 4K are complimented with the newly developed rear section of the 9015 ONE BASIC stock. The solid and robust stock is equipped with the well-known and common ANSCHÜTZ butt plate and cheek piece adjustments which have been proven over many years.
The modular construction of the ONE-stock
The stock, including grip, can be separated from the fore-end in just a few seconds by simply releasing one screw. It can then be reassembled precisely without any play to form a 100?% rigid connection. This offers you the opportunity to change the ONE Basic rear section for the rear section of the 9015 ONE, allowing for even more adjustment possibilities and stock positions.
Delivery volume: Depending on configuration (sight set, compressed air cylinder and grip) and additional: Sight riser block, transport? gun case MEGA and accessory box with filling adapter, air release screw, special grease, tool set, safety discs, o-rings,, manual with original test target.
The new 9015 barreled action was developed based on the successful ANSCHÜTZ 9003 Premium air rifle barreled action. With optimised air pressure control characteristics, a new patented 5065 4K trigger with ball bearings and versatile adjustable trigger blade, a stainless steel barrel unit and the thin, special coated barrel extension, also made of stainless steel, this barreled action will replace all former ANSCHÜTZ air rifle barreled actions in the future.
- Maintenance free stabilizer.
- Revolutionary firing pin and valve system for even calmer shot release.
- Optimised flow behaviour.
- Recoil and vibration free compressed air barreled action.
- Extremely short lock time.
- Precisely adjustable match trigger with axial ball bearing.
- Optimised cocking.
- Special concept for dry firing and safety.
- Air filter against pollutions.
- Maintenance-friendly system.
- Easily exchangeable compressed air cylinder with manometer.
- Adjustable trigger blade.
- Cocking lever mountable left and right.
Caliber: 4.5 mm
Rifling (mm): 420
Length of twist (mm): 480
Number of grooves: 12
Barrel length (mm): 420
Length of the barrel unit (mm): 592
Length of aiming (mm): 620 - 897
Muzzle diameter (mm): 22
Length of barreled action (mm): 734 - 844
Weight (g): 2400
ANSCHÜTZ match triggers have always set new standards of quality, reliability and precision. With the newly developed and patented 5065 4K trigger, ANSCHÜTZ presents top-class sport with a mechanical trigger that goes above and beyond all previous ANSCHÜTZ triggers. It could probably be said that it is the best mechanical trigger in the world. The patented 5065 4K trigger impresses with its unprecedented extremely short trigger release time. The axial ball bearing (4K?=?4 bearing balls, marked in yellow) on the trigger lever guarantees completely play-free trigger blade mounting. The resulting harmonic, even-running first stage travel leaves no desires unfulfilled. The very clear contrast when achieving the two stage gives the shooter a very precise contact with the shot.
Type: Two stage trigger 5065 4K
Tilting range (mm): 11
Adjustment of the trigger shoe (mm): 22
Trigger blade: 007434
Color of the trigger shoe: Silver
Trigger weight, adjusted (g): 100
Adjustment of the trigger weight (mm): 30-170
Rear Sight 6805 with anti-glare tube.
Rear sight housing made of aluminum.
Front sight rotationally adjustable.
Incl. aperture clamping screw and transparent aperture (Ø M22).
Aluminuim grooved rail on the lower side: yes
Length of stock (mm): 767 - 807
Weight (g): 1700
Stock type: BENCHREST
Butt plate: 4759 A
Material: Aluminum / Stainless steel / Carbon
Stock color: black / silver / red
Length of pull (mm): 310 - 365
Grip material: Walnut
Grip color: naturally oiled
incl. screws, especially for ANSCHÜTZ rifles.
Alu Butt Plate 4759/4758:
For many shooters the radius at the butt plate is too large. The result is that the butt plate does not fit the shoulder correctly. The butt plate models 4759 and model 4758 offer a solution for this problem. The variable adjustment of shoulder with (only model 4759) and tilting range allow a perfect fit. The aluminum butt plate can be screwed on directly to all stocks with straight stock ends.
Light, extra strong aluminum design.
Angle adjustments directly at the butt plate and therefore no angle errors.
All butt plate adjustments correspond to the ISSF rules.
Variable and individual adjustments.
Easy handling of adjustment elements.
Scales for reproducing adjustments quickly.
Model 4759, no-slip profile in the shoulder area.
Vertically and horizontally adjustable, can be tilted.
Further adjusting possibilities with model 4759:
Upper wing angle directly adjustable from the front via new clam ping (see arrow).
Adjustable shoulder width.
Variable length adjustment by column guide 4759-2000 and stop nut
Adjustable (mm): 60 mm
Weight (g): 230 g
Butt Plate Carrier
Quick re-adjustment of your settings due clear scales and nuts.
In addition the nuts prevents slipping of the butt plate in position and fixing the length adjustment.
Light weight, high strength aluminum construction.
Length adjustment without thread.
Two way height adjustment.
Column distance (mm): 30
Column diameter (mm): 12
Length (mm): 77
Weight (g): 90
The fore-end raiser block with patented ANSCHÜTZ quick release allows stepless height adjustment of the palm rest. The dimension displayed shows the absolute distance from the palm rest to the barrel axis. The innovative adjustment of the fore-end elevation allows the palm rest to be moved along the fore-end and directly turned under the barrel axis.
This optimised center of gravity provides the highest level of support stability. In addition, the rifle can be easily converted to a bench rest shooting version (German discipline).
The ONE-benchrest plate with 2-point rest is specially developed for benchrest shooting (German disciplines), is made of high-strength aluminum and offers perfect conditions for a solid placement of the air rifle.
Color: black + red
The new grip shape with scalloped inner side enables the shooter to hold the rifle even closer to the body in the shooting position.
Length (mm): 80
Width (mm): 50
Height (mm): 105
Weight (g): 135